Put a bottle in the shower drain: what happens is unexpected

1. Get a Plastic Bottle: Find a small plastic bottle that will fit the shower drain. You may need to experiment with different bottle sizes to find one that works best for your drain.
2. Remove the Grille: Start by removing the upper grille of your shower drain. Make sure the drain plug is properly screwed in before you proceed.
3. Measure the Bottle: Turn the bottle upside down and mark the depth it needs to reach. Using a marker, note the point where the bottle should be cut, keeping in mind that it should be slightly above the cap line to prevent it from falling off.
4. Cut the Bottle: Using a pair of scissors, cut the bottle about half a centimeter above the marked line.
5. Create Zigzag Edges: With the portion of the bottle that has the screw cap, use scissors to shred the edges in a zigzag pattern, creating sharp teeth. This will help ensure the bottle stays securely in place.
6. Drill Small Holes: Take a screwdriver or a similar tool and drill several small holes throughout the bottle, including the cap. The holes are essential because they will allow the water to drain while filtering out hair and other debris.
7. Insert the Bottle: Finally, insert the bottle upside down into the shower drain. The holes will allow water to pass through, while the zigzag edges and the cap will prevent cockroaches from crawling up into the bathroom.

Conclusion: A Simple and Effective Solution

This clever plastic bottle trick is an easy way to prevent cockroaches from entering your bathroom through the shower drain, while also preventing hair from clogging it. With just a small plastic bottle, you can take control of your bathroom’s cleanliness and keep it pest-free without spending money on expensive products.

So, next time you’re in the bathroom, consider trying this simple, yet highly effective trick—it’s a great way to address a common concern with minimal effort.